Line 6 Helix Preset

JV LIVE

One preset. Eight snapshots. A complete live show rig, from clean verses to boosted solos, all under your feet.

No IRs required. Stock cab. Nothing extra to buy, install, or load.
$15 One time. Instant download.
A Line 6 Helix floor unit and electric guitar on a dark stage

Hear it

Every snapshot, no editing on the audio.

Demo video coming

Audio is raw Helix output. No post processing, no double tracking, no added reverb or EQ.

The eight snapshots

Two cleans, three drives, one big one, two solos.

Snapshots are the eight variations living inside this one preset. You switch between them with your feet. They run in gain order in four groups: two cleans, three drives, the big ambient sound, then the two boosted solos.

1CLEANStraight clean with light reverb. The workhorse.
2CLEAN AMBClean with delay and full ambience. Pads, swells, intros.
3LT DRIVELight breakup, dry. Edge of breakup rhythm.
4DRIVE DRYFull distortion, no reverb, no delay. Tight and dry.
5DRIVE VBSame distortion with hall reverb. The main rhythm sound.
6BIG LEADEverything on. Drive plus delay, hall and shimmer.
7SOLOLead tone with a volume boost.
8SOLO BIGSame boost with extra ambience on top.

Snapshots 7 and 8 sit about 4 dB above the rest. That is a lead boost on purpose, and the README tells you how to level it out if you would rather it did not.

What is inside

Built on stock models, so it loads and plays.

Amp
Brit J45 Brt
Cab
Cab 2x12 InterstateStock Line 6. Not an IR.
Drives
Kinky Boost into Compulsive Drive
Time and space
Transistor Tape delay, Hall and Glitz reverbs
Dynamics
LA Studio Comp, Red Squeeze, Deluxe Comp
EQ
Parametric plus two 3-Band
Noise gate
On, threshold -68.7 dBSet low: kills hum, keeps quiet notes.
Tempo
101.4 BPM

What you need

Make sure it fits your rig.

  • Works with: Helix Floor, Helix LT, Helix Rack, Helix Native
  • A computer, Mac or Windows. Helix presets load through HX Edit, which is free from Line 6. The Helix has no USB stick port, no card slot, and no wireless, so a computer and a USB cable are the only way any preset gets on there. It does not have to be your computer, and it is a five minute job.
  • Firmware 3.11 or newer. If you are older than that, update before buying.
  • Does not work with: HX Stomp, HX Stomp XL, HX Effects, POD Go, or Helix Stadium. Those units cannot run this many blocks, and Stadium uses a different format.
  • Built for going direct to front of house, an FRFR cab, studio monitors, or headphones.
  • Works across the board with all guitars. Dialed in on an HSS, checked on single coils and humbuckers.
  • Set Global EQ to off. The README walks you through the three global settings that matter.

Frequently Asked Questions

Everything worth knowing before you buy.

Do I need to buy impulse responses?

No, and that is the point. It runs on a stock Line 6 cab, so there is no IR to purchase, no file to load into a numbered slot, and no way to hit the "IR could not be found" error. Import one file and play.

Do I need a computer to load it?

Yes. Every Helix preset, from anyone, installs through HX Edit on a Mac or Windows computer over USB. The Helix has no flash drive port, no memory card slot, and no wifi, and presets cannot travel over MIDI. HX Edit is a free download from Line 6. If you do not own a computer, any borrowed laptop will do the job in about five minutes, and once the preset is on your Helix it stays there.

Can I really get through a whole show on this one preset?

That is exactly what it was built for. Eight snapshots cover clean verses, ambient pads, edge of breakup, full rhythm, a big ambient lead, and two boosted solos. Jake runs entire services and shows on it without ever leaving the patch.

What volume should I set it at?

For live shows, the big master volume knob between 50 and 70 percent is the sweet spot. That is where it was dialed in going direct to front of house, and it leaves the engineer plenty of headroom at the board.

Will it work with my guitar?

Yes. It works across the board with all guitars. It was dialed in on an HSS and checked against single coils and humbuckers, and it holds up on all of them. Hotter pickups may want the input pad on, which is one setting and covered in the guide.

How close will it sound to the demo?

Very close. The demo is raw Helix output with nothing added, no post processing and no double tracking, so what you hear is genuinely what the preset does. Your guitar, pickups, and speakers are their own instrument though, so expect to nudge a knob or two to sit it in your room. That is normal, and the guide tells you which three settings matter most.

What exactly do I get?

A zip file containing the preset, an illustrated PDF setup guide, the same guide as plain text, and the license. The PDF walks through install, the three global settings that matter, what every snapshot does, and live volume, all laid out so you can read it on a phone at soundcheck.

Can I use it on my recordings and at church?

Yes. Records, releases, live shows, services, streams, videos, commercial or not. No extra fee and no credit required. The only thing you cannot do is resell or share the file itself.

What if I need help?

If you have questions, concerns, or issues, contact [email protected] for support. If something will not import, it is almost always firmware, so updating your Helix and HX Edit fixes it first.

Digital product, delivered immediately, so all sales are final. If you have questions, concerns, or issues, contact [email protected] for support.

Contact

Questions before you buy? Ask away.

Not sure it will work with your rig, or run into something after you bought it? Send a message here and it goes straight to Jake's inbox.

Sent. Jake will get back to you at the email you gave.

Prefer regular email? Reach out to [email protected] for support.